这样才是热风炉的正确使用方法【推荐】

时间:2019年02月06日信息来源:环亚ag88 点击:次 收藏此文】 【字体:

环亚ag88使用要点总结:首先,司炉工在操作运营设备时不能超压使用环亚ag88,承压环亚ag88在出厂时已经对其能够承受的最大气压进行了设定,在日常使用中需要注意不得让承压环亚ag88的气压值超过出厂设定的最大气压值。最大气压值的设定是根据环亚ag88的材质厚度和检测标准来设定的用户不得随意进行更改的主要内容就为大家介绍到这里,主要是通过承压热风炉的特点和安全性的角度进行了简单的说明,用户在实际使用中一定要严格按照以上三点来对承压热风炉进行使用以防止恶性事故的发生。
Summary of the main points of hot stove use: First of all, the fireman should not use the hot stove under overpressure when operating the equipment. The maximum pressure that the pressurized hot stove can withstand has been set when it leaves the factory. In daily use, it is necessary to pay attention not to let the pressure value of the pressurized hot stove exceed the maximum pressure set by the factory. The setting of maximum pressure is the main content that users can't change freely according to the material thickness and testing standard of hot blast stove. It is introduced here mainly through the characteristics and safety of pressurized hot blast stove. Users must use the pressurized hot blast stove strictly according to the above three points in order to prevent evil. The occurrence of sexual accidents. 其次,热风炉系统在安装调试完毕后,用户是不可随意进行热风炉改造的,承压热风炉和高压热风炉有着本质上的区别,常压热风炉的制造方法和制造质量和承压热风炉有着明显的差别,环亚ag88通过直接和大气相通让气压始终保持在固定的状态,而热风炉则会跟随水温变化而产生气压的变化。实际使用中对于承压热风炉不能按照常压热风炉来使用,更不能随意对其进行改造。
Secondly, after the installation and commissioning of the hot-blast stove system, users are not free to carry out the transformation of the hot-blast stove. There are essential differences between the pressurized hot-blast stove and the high-pressure hot-blast stove. There are obvious differences in the manufacturing method and quality of the atmospheric hot-blast stove. The gas hot-blast stove keeps the pressure constant through direct communication with the atmosphere, while the hot-blast stove will follow suit. The pressure changes with the change of water temperature. In actual use, the pressurized hot blast stove can not be used according to the normal pressure hot blast stove, let alone be reformed at will.

最后,保持热风炉附件完好,承压热风炉配备了水位计压力表和安全阀等保障安全的附件,并且还配备了水位报警器和超压报警器能够从多方面来保障热风炉的安全性。这些安全附近是承压热风炉和操作者进行沟通和交流的工具,所以其完好性对于承压热风炉的安全使用有着重要的关系。
Finally, to keep the accessories of hot stove intact, the pressurized hot stove is equipped with water gauge, pressure gauge and safety valve, and also with water level alarm and overpressure alarm to ensure the safety of hot stove in many ways. These safety neighborhoods are tools for communication and communication between pressure hot stoves and operators, so their integrity has an important relationship to the safe use of pressure hot stoves.
(作者:环亚ag88 编辑:admin)
文章热词:热风炉

热门文章

推荐文章